AB100L

AB100L is specifically designed for the Haldex-Midland Emergency Air Brake Push/Pull Controller Valve (#KN 20021 or #RKN 20021).  There are two plastic plunger caps/knobs that work with this device.  They are identified as:

This Air Brake is most commonly used in RV’s, Buses and some light duty Trucks.  It is recommended that you consult the manufacturer of your RV, Truck or Bus to verify that the Haldex-Midland Air Brake Controller Valve is being utilized in your vehicle. Master Lock® is included within the packaging of the AB100L.

AB200L

AB200L is specifically designed for the Bendix Emergency Air Brake PP-1 Push/Pull Controller Valve (#276567).  There are two plastic plunger buttons that work with this device.  They are identified as:

This Air Brake is most commonly used in RV’s, School Buses, Transit Buses & Commercial Trucks.  It is recommended that you consult the manufacturer of your RV, Bus or Truck  to verify that the Bendix Air Brake Controller Valve is being utilized in your vehicle. Master Lock® is included within the packaging of AB200L. Note: The Haldex-Midland plastic cap/knob can be interchanged (KN 20901) with the Bendix design and the AB200L will work, but we recommend not to use it. It is recommended that you use the original factory equipped design for the PP-1 Unit.

AB300

AB300 is specifically designed for the Haldex-Midland Emergency Air Brake Push/Pull Controller Valve (#KN 20031 or #RKN 20031).  The OEM Part number is: N20928CK. It is recommeded that you utilize the factory aluminum plunger knob that came with this device.  It is identified as:

This Air Brake is most commonly used in RV’s and some Buses.  It is recommended that you consult the manufacturer of your RV or Bus to verify that the Haldex-Midland Air Brake Controller Valve is being utilized in your vehicle. A stainless Steel Jam Nut is included within the packaging of the AB300. This design does Not utilize the Master Lock®.

AB400L & AB500L

AB400L - For earliy model trucks that have not replaced the original PP-DC or MV-3 Valves. The early model designs have a stop on the shaft of the controller valve. This design is still being offered as a replacement unit.**

AB500L - For trucks built after Mid-2008 or trucks that have replaced the original PP-DC or MV-3 value with the new design. On the new design, the plastic shaft is smooth and tapered, not like the early style that has a stop on the shaft.

AB400L & AB500L are specifically designed for the Bendix Emergency Air Brake Push/Pull Controller Valves listed below.  There are two plastic plunger buttons that work with this device (Parking Brake / Yellow colored Plunger Knob and for the Trailer Air Supply (if equipped) Red colored Plunger Knob). The Bendix Air Brake Controller Valves that are compatible with the AB400L & AB500L are identified below:

This Air Brake is most commonly used in Commercial Trucks (with or without a Trailer Air Supply), Commercial Buses and some RVs.  It is recommended that you consult the manufacturer of your RV, Bus or Truck  to verify that the Bendix Air Brake Controller Valve is being utilized in your vehicle. Optional Master Lock® is included within packaging of both designs. Some Tractor manufacturers utilize a trim piece/panel that may limit the ability for these units to fit properly - refer to the AB700L for this type of application.

AB600L

AB600L is designed for vehicles equipped with the Bendix Commercial Push/Pull Controller Valve. The AB600L has been specifically designed for the late model International ProStar Tractors with or without Sleepers. The curved trim piece on the dash surrounds the Push/Pull Controller Valve. The AB600L can only be applied from the top of the Plunger Knob - in a downward movement. Once in place, the AB600L is designed to follow the contour of the dash. The Master Lock® is Included.

It is recommended that you consult the manufacturer of your truck to verify that the Bendix Air Brake Controller Valve is being utilized in your vehicle.

AB700L

Designed for vehicles equipped with the Bendix Commercial Push/Pull Controller Valve. The AB700L has been specifically designed for the late model Freightliner, International WorkStar, TransStar and DuraStar Tractors. It also works with early model Kenworth T800 designs. The AB700L is designed to fit most tractors that have limited clearance between the trim piece/panel on the dash and the bottom of the Plunger Knob. The AB700L is an alternative to the AB400L & AB500L - vehicles that have between 1.125 inches to 1.5 inches clearance. When the AB700L is in-place, the operator should not be able to engage the parking brake. The Master Lock® is Included. 

It is recommended that you consult the manufacturer of your truck to verify that the Bendix Air Brake Controller Valve is being utilized in your vehicle.

(TDS) THEFT DETERRENT SLEEVE

AB400LTDS - AB500LTDS - AB700LTDS

From the beginning the "Air Brake Plunger Secring Device" was designed to be a "Lockout / Tagout" safety and securing product. With the recent demand from our customers for more of a Theft Deterrent Option, we added the TDS. Now in addition to being a Safety and Securing product, it is a Theft Deterrent Device too. The TDS is manufactured from Polycarbonate that is the same material that bullet proof glasss and DVD/CD's are made from - very strong and impact resistant.

Aplication of this product is very simple... slip the TDS around the appropriate device once in place, slide the Master Lock® through the holes that have been provided in the TDS and the Air Brake Plunger Securing Device and now your vehilcle is Secure!

These designs are most commonly used on Commercial Vehicle applications. 

It is always recommended that you consult the manufacturer of your vehicle to verify which design is best suited for your particular vehicle. Also refer to the above listed product discriptions for more information.